Sedona Dehydrator with Stainless Steel Trays Combo
Product values
-
BPA FREE BPA-free product, does not contain BPA - Bisphenol A.
Description
Sedona Combo dehydrator with stainless steel trays offers the same features as the Sedona Combo SD-P9150-F, but includes stainless steel trays.
With Sedona Combo SD-S9150-B the dehydration process for food is very easy and comfortable thanks to the incorporation of TST (two-phase sequential temperature control) with 3 programs, dual motor-fan technology and digital controls.
Indication
Sedona Combo Dehydrator Features:
- Double motor-fan technology: which allows it to be used at full load (9 trays) or at half load (4 trays), allowing the optimization of energy consumption.
- Digital temperature selector from 30º C to 68º C, for a careful adjustment of temperatures degree by degree.
- Timer up to 99 hours and up to 150 hours of operation in continuous mode.
- Large capacity: equipped with 9 stainless steel one-piece mesh trays (plus separator tray for the two dehydration chambers). When we use the "half load", placing the tray in the center divides the interior of the Sedona into two 4-tray chambers.
- Removable tray for easy interior cleaning: Sedona Combo incorporates a removable tray that fits into the base and is easily removed. This tray does not take away dehydration space (it is placed under the lower tray).
- BPA-free materials: polypropylene exterior and stainless steel trays.
- 3 dehydration programs: FAST (fast), RAW (low temperature) and COMBO (using the TST System: two-stage sequential temperature control - "Two-Stage Sequential Temperature").
This Sedona program allows you to dehydrate at a higher temperature initially and then lower the temperature. It is predetermined to dehydrate at 65ºC for the first two hours and then the dehydrator lowers the temperature to 42ºC automatically (these temperatures can be varied).
When do we use it? If foods with high water content or large portions are to be dehydrated, dehydrating at 42º from the beginning greatly lengthens the process and fermentations can occur. If we use a higher temperature at the beginning, we favor evaporation initially and facilitate the process, obtaining a better result. Evaporation produces refrigeration, so the food does not reach the 65ºC heat generated by the dehydrator. A higher temperature at the beginning, we favor evaporation initially and facilitate the process, obtaining a better result. - Interior LED lights: which turn on automatically when the door is opened and allow greater control of the dehydration process.
- Safety glass door that allows you to see the interior. With stainless steel handle and trim that makes it stronger and improves its aesthetics.
- Detachable digital panel: if repair is required, it is more practical to transport only the digital panel. Contains European plug.
Intake mode
Dehydrates all kinds of food, ideal for preserving fruits, vegetables, mushrooms, herbs ... and makes crackers and other delicious raw dishes.
Precautions
The manufacturer recommends using the dehydrator 10 cm away from other appliances or furniture.
Composition of Sedona Dehydrator with Stainless Steel Trays Combo
Net weight: 10.9 kg
Contents: 9 wire mesh trays, 1 separating tray and 1 protective base tray for easy cleaning
Warranty: 5 years
Materials Dehydrator: polypropylene / Trays: stainless steel
Measurements (height x width x length): 37 x 43 x 50 cm
Power: 600W
Voltage: 220V
-
There are no questions for this article yet.
Questions and Answers
Ask a question about this article and you will get reply from a huge Naturlovers community
If you don't see it, check the spam, it may have been marked as spam.